- MPPT Temperature Compensated Charging
- Fully Automatic Operation
- LCD Displays: Battery Volts, Battery Temp, Battery Level, Load
- Current and Solar Current
- Autoranging 12V or 24V Battery Arrays
- Multimode Load Operation – 5 selectable modes
- Soft Start Load Output to Power High Capacitive Loads
- Automatic 30day Battery Equalization
- Conformal Coated Electronics for Environmental Protection
- TVS lightning protection, Industrial Temperature Range
- Low self consumption <1W
The Tycon Solar™ TP-SC24-40-MPPT solar controllers are MPPT (Maximum Power Point Tracking)
temperature compensated battery charging controllers. The battery temperature probe cable is included. The
controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Flooded,
AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an
integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load
Current and Solar Current.
There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this
configuration and the available Android or IOS mobile app, the solar controller can be monitored and controlled from a
They have multiple load operating modes which can be set through the buttons on the controller. The load output has a soft start feature so it can smoothly and reliably power up high capacitance loads up to 20A.
There is a convenient On/Off button to disconnect load power when the unit is operated in the default mode (15).
They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, overdischarge
and over-temperature. The built-in over-discharge protection and low self consumption ensures the battery is
not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery.
The units are protected against lightning strikes with TVS diode protection. They operate over a wide industrial
temperature range. Electronics are conformal coated for environmental protection.
An automatic battery equalization charge automatically engages once every 30days (Programmable). The equalization
charge helps to balance the batteries in an array and reduce the possibility of battery sulfation.
Connections are via 6 screw terminals for wire size up to 8AWG. The controllers are internally fused for protection, but
we recommend always using an external 40A fuse between the controller and the battery. There are four screw holes
for wall mounting. In addition, there are two DIN Rail brackets for DIN Rail mounting included.Spec Sheet