Tycon Power Systems
- Remotely Measure 4 Voltages, 4 Currents, 2 Temperatures
- Remotely Control Equipment with 4 Relays: 2 NC and 2 NO
- Automatic Control of Relays by Volts, Amps, Temp, Ping, Time
- Access via Web or SNMP. Automatically Send Email Alerts
- On-Board Datalogger and History Graphs
- Customizable UI
- Accepts power via PoE (802.3af or Passive) or wire terminal
- DIN Rail Mounting
The PowerSens™ Web Based Remote Monitor and Control System is a versatile tool
which enables the equipment designer and installer to remotely monitor their equipment
and site. The unit can be accessed via the network (web and SNMP) to remotely monitor
up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using
4 on-board relays. The system has built-in surge protection to prevent damage from
On board data-logging and graphing capabilities allow the user to see history of the various parameters being
measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the
measurement parameters real-time via any web browser. The web interface allows access and control via desktops,
laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access.
The system allows control of the relays based on Voltage, Current, Temperature, Time or Ping Watchdog. This
provides almost unlimited flexibility.
The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device
off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a
PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally
Closed type, Relay CH3 and CH4 are Normally Open type. Relays don’t use any power when they are in their default
position. CH4 has additional functionality built into the user interface to allow for starting a generator.
Two of the current ports provide bi-directional current (+/-), showing direction of current flow. This is useful for
monitoring batteries so you can see when the battery is charging and when it is discharging. One of these current ports
supports external current shunts so very large currents can be monitored. The User Interface provides for quick
calibration of external shunts by entering the shunt resistance.
Connections are via removable wire terminal connectors. This allows for easy troubleshooting and maintenance
because the unit can be removed from the system without disturbing the system wiring.
User defined labels for each parameter makes sure that when viewing the web interface or graphs that users can
quickly identify the parameter they are concerned about. An internal real time clock based on PC time or Internet time
ensures that data logging is accurate. Each Monitor can also have a unique name to identify it on the network. This
makes it easy to manage multiple units on a network.
Each parameter has programmable +/- offsets to be able to perform field calibration to compensate for things such as
line loss or variations in measuring equipment. This provides unsurpassed flexibility as each device can be tailored by
customer to their specific needs.
(Spec Sheet) | (User Guide)