Backup System-Solar Ready
- Protects sensitive electronics from damaging power line surges
- Provides 24hour battery backup @ 7W load or 12 hours @28W load
- Powered Over CAT5 Ethernet cable
- 18VDC POE voltage, 12VDC Secondary wire terminal output (unregulated)
- Max 18W Output
The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas. There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure. Models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or instead of the POE power supply. Multiple configurations are available for 12V or 24V systems with various battery storage capacities. A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9Ah battery at room temperature or 17 hours at -20 deg C.
SPEC SHEET | USER GUIDE